Polypropylene Fiber Chopped Strands for Concrete

• Customization: Available
• Fiberglass Type: Polypropylene Fiber
• Certification: ISO
• Technique: Cutting
• Filament Diameter: 32-35
• Packing: 25 Kg/Bag;500kgs/Pallet
• Quantity: 10000kgs/20′fcl
• Commodity: Polypropylene Fiber Chopped Strands
• Transport Package: Bags
• Specification: 12/18mm
• Trademark: BH
• Origin: China
• HS Code: 70199090
• Production Capacity: 100000 Per Week

Product Description

Product Description

POLYPROPYLENE FIBER CONCRETE

 

Polypropylene fiber can significantly improve the bond performance between fiber and cement mortar, concrete. This prevents early cracking of cement and concrete, effectively prevent the happening and development of mortar and concrete cracks, so to ensure uniform exudation, prevent segregation and hinder the formation of settlement cracks.The experiments show that mixing 0.1% volume content of fiber,the crack resistance of concrete mortarwill increase 70%,on the other side,it also can significantly improve the permeability resistance up to 70%.
Polypropylene fiber (short-cut strands of very fine denier monofilament) is added to the concrete during batching. Thousands of individualfibers are then evenly dispersed throughout the concrete during the mixing process creating a matrix-like structure.

Product Feature

* Reduced explosive spalling in fire
* Alternative to crack control mesh
* Improved freeze/thaw resistance
* Reduced water & chemical permeability
* Reduced bleeding
* Reduced plastic settlement cracking
* Increased impact resistance
* Increased abrasion properties

 

Product Parameters

Material	100% Polypropylene
Fiber Type	Monofilament
Density	0.91g/cm3
Equivalent Diameter	18-40um
Length	3/6/9/12/18mm(can be customized)
Tensile Strength	≥450MPa
Modulus of elasticity	≥3500MPa
Melting Point	160 - 175ºC
Crack Elongation	20+/-5%
Acid / alkali Resistance	High
Water Absorption	Nil

Application

Less expensive than conventional steel mesh reinforcement
Most small builder, cash sales and DIY applications
Internal floor-slabs (retail stores, warehouses, etc.)
External slabs (driveways, yards, etc.)
Agricultural applications
Roads, pavements, driveways, kerbs
Shotcrete; thin section walling
Overlays, patch repair
Water retaining structures, marine applications
Security applications such as safes and strongrooms
Deep lift walls
The fiber should ideally be added at the batching plant although in some instances this may not be possible and addition at site will be the only option. If mixing at the batching plant, fibres should be the first constituent, along with half the mixing water.
After all the other ingredients have been added, including the remaining mixing water, the concrete should be mixed for a minimum of 70 revolutions at full speed to ensure uniform fiber dispersion. In the case of site mixing, a minimum of 70 drum revolutions at full speed should take place.

Company Profile

• For more please check--Trade Assurance
• Your inquiry will be replied within 24hours
• Free sample

 
 
 
website:  http://porter36.en.made-in-china.com
website on porter36.en.made-in-china.com:  http://porter36.en.made-in-china.com

FAQ

1.Moq:1000kgs
2.Delivery time:15days after confirm order
3.Payment term:T/T 30%  deposit in advance,70% balance before shipment date.