Rechargeable 2V 200ah Solar Storage Opzv Lead Acid Battery

• Customization: Available
• Type: Lead-Acid Batteries
• Usage: UPS
• Model NO.: BH
• Nominal Voltage: 12V
• Discharge Rate: Medium Discharge Rate
• Shape: Square Battery
• Electrolyte: Acid
• Installation: Packaged
• Rechargeable: Chargeable
• Transport Package: Carton
• Specification: 500*350*350mm
• Trademark: BeiHai
• Origin: Jiujiang, China
• Package Size: 50.00cm * 35.00cm * 36.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Description

OPzV Battery

OPzV solid state lead batteries utilize fumed silica nanogel as electrolyte material and a tubular structure for the anode. It is suitable for safe energy storage and backup time of 10 minutes to 120 hours application scenarios.
OPzV solid-state lead batteries are suitable for renewable energy storage systems in environments with large temperature differences, unstable power grids, or long-term power shortages.OPzV solid-state lead batteries give users more autonomy by allowing the batteries to be mounted in cabinets or racks, or even next to office equipment. This improves space utilization and reduces installation and maintenance costs.

Product Parameters

Model	Nominal Voltage(V)	Nominal Capacity(Ah) (C10)	Dimension (L*W*H*T H)	Weight	Terminal
BH-OPzV2-200	2	200	103*206*356*389mm	18KG	M8
BH-OPzV2-250	2	250	124*206*356*389mm	21.8KG	M8
BH-OPzV2-300	2	300	145*206*356*389mm	25.2KG	M8
BH-OPzV2-350	2	350	124*206*473*505mm	27.1KG	M8
BH-OPzV2-420	2	420	145*206*473*505mm	31.8KG	M8
BH-OPzV2-500	2	500	166*206*473*505mm	36.6KG	M8
BH-OPzV2-600	2	600	145*206*646*678mm	45.1KG	M8
BH-OPzV2-800	2	800	191*210*646*678mm	60.3KG	M8
BH-OPzV2-1000	2	1000	233*210*646*678mm	72.5KG	M8
BH-OPzV2-1200	2	1200	275*210*646*678mm	87.4KG	M8
BH-OPzV2-1500	2	1500	275*210*795*827mm	106KG	M8
BH-OPzV2-2000	2	2000	399*212*770*802mm	143KG	M8
BH-OPzV2-2500	2	2500	487*212*770*802mm	177KG	M8
BH-OPzV2-3000	2	3000	576*212*770*802mm	212KG	M8

Positive Plate	Tubular plate with calcium-tin alloy
Negative Plate	Flat plate grid
Separation	Microporous combined with corrugated separator
Case and Cover Material	ABS
Electrolyte	Fixed as gel
Post Design	Leak-proof with brass insert
Intercells	Fully insulated, flexible copper cables
Temp. Range	30° to 130° F (68° to 77° F recommended)
Float Voltage	2.25 V/cell
Equalize Voltage	2.35 V/cell

Product Feature

Charging Characteristics

(1) When float charging, constant voltage 2.25V/single cell (setting value at 20ºC) or current below 0.002C is used for continuous charging. When the temperature is below 5ºC or above 35ºC, the temperature compensation coefficient is: -3mV/single cell/ºC (with 20ºC as the base point).
(2) For equalization charging, constant voltage 2.30-2.35V/single cell (set value at 20°C) is used for charging. When the
temperature is below 5°C or above 35°C, the temperature compensation factor is: -4mV/single cell/°C (with 20°C as the base point).
(3) Initial charging current is up to 0.5C, mid-term charging current is up to 0.15C, and final charging current is up to 0.05C.
The optimum charging current is recommended to be 0.25C.
(4) The charging amount should be set to 100% to 105% of the discharging amount, but when the ambient temperature is below 5ºC, it should be set to 105% to 110%.
(5) The charging time should be extended when the temperature is lower (below 5ºC).
(6) Intelligent charging mode is adopted to effectively control the charging voltage, charging current and charging time.

Discharge Characteristics

(1) The temperature range during discharge should be within the range of -45ºC~+65ºC.
(2) Continuous discharge rate or current is applicable from 10 minutes to 120 hours, without fire or explosion in short circuit.

Safety Characteristics

(1) Battery casing: OPzV solid lead batteries are made of flame-retardant grade ABS material, which is non-combustible;
(2) Separator: PVC-SiO2/PE-SiO2 or phenolic resin separator is used to inhibit internal combustion;
(3) Electrolyte: Nano fumed silica is used as electrolyte;
(4) Terminal: Tin-plated copper core with low resistance, and the pole post adopts sealing technology to avoid leakage of the battery pole post.
(5) Plate: The positive plate grid is made of lead-calcium-tin alloy, which is die-cast under 10MPa pressure.

Process Characteristics

(1) The use of lead calcium tin special alloy die-casting plate grid, can inhibit corrosion and expansion of the plate grid to
prevent internal short circuit, and at the same time to increase the hydrogen precipitation over-potential, inhibit the generation of hydrogen, to prevent the loss of electrolyte.
(2) Adopting one-time filling and internalization technology, the solid electrolyte is formed once without free liquid.
(3) The battery adopts valve seat type safety valve with opening and reclosing function, which automatically adjusts the internal pressure of the battery; maintains the airtightness of the battery, and prevents the external air from entering into the inside of the battery.
(4) The pole plate adopts high temperature and high humidity curing process to control the structure and content of 4BS in the active substance to ensure battery life, capacity and batch consistency.

Application

OPzV solid lead batteries are widely used in medium and large-scale energy storage, electric power, communication, petrochemical, rail transportation and solar wind energy and other new energy systems.

Packaging & Shipping

Company Profile