| Customization: | Available |
|---|---|
| Connector Type: | CCS1, CCS2, CHAdeMO, GB/T |
| Installation: | Floor Type |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The charging process of an electric vehicle requires the conversion of alternating current (AC) from an external power source to direct current (DC) stored in the battery.DC charging piles, on the other hand, complete the AC to DC conversion process inside the charging pile, supplying DC power directly to the electric vehicle battery.
DC charging piles directly convert AC to DC to quickly charge the EV's battery with high power. This method bypasses the limitations of the on-board charger and charges the battery directly, resulting in faster charging speeds. DC charging piles have high charging power, usually above 60kW, and therefore charge faster, ideally charging the battery to full capacity in 20-150 minutes.
| Model Name | BHDC-180KW-2 | |
|
AC
Nominal
Input
|
Voltage(V) | 380±15%AC |
| Frequency(Hz) | 45~66HZ | |
| Input power factor | ≥0.99 | |
| Qurrent Harmonics(THDI) | ≤5% | |
|
DC
Nominal
Output
|
Efficiency | ≥96% |
| Voltage(V) | 200~750V | |
| power | 180KW | |
| Current | 360A | |
| Charging port | 1/2 | |
| Cable Length | 5m | |
|
Other
Equipment
Information
|
Noise(dB) | <65 |
| Precision of steady current | ≤±1% | |
| Voltage regulation accuracy | ≤±0.5% | |
| Output current error | ≤±1% | |
| Output voltage error | ≤±0.5% | |
| Average current imbalance degree | ≤±5% | |
| Screen | 7 Inch industrial screen | |
| Chaiging Operation | swipe or scan | |
| Energy Meter | MID certified | |
| LED Indicator | Green/yellow/red color for different status | |
| communication mode | ethernet network | |
| Cooling method | Air cooling | |
| Protection Grade | IP54 | |
| BMS Auxiliary Power Unit | 12V/24V | |
| Reliability(MTBF) | 50000 | |
| Installation Method | Pedestal installation | |
|
Environmental
Index
|
Working Altitude | <2000M |
| Operating temperature | -20~50 | |
| Storage temperature | -20~70 | |
| Working humidity | 5%-95% | |
DC charging piles are widely used in public charging stations, highway service areas, commercial centers and other places, and can provide fast charging services for electric vehicles. With the popularization of electric vehicles and the continuous development of technology, the application range of DC charging piles will gradually expand.
){kind=link}