Product Description
Phenolic Fiberglass Molding Plastics
This series of products are thermosetting molding plastics made of e-glass fiber and modified phenolic resin by soaking and baking. It is used for pressing heat-resistant, moisture-proof, mildew proof, high mechanical strength, good flame retardant insulating parts, but also according to the requirements of the parts, the fiber can be properly combined and arranged, with high tensile strength and bending strength, and suitable for wet conditions.
Product Feature
- Good Mechanical Properties: Our products exhibit excellent mechanical properties, ensuring durability and reliability in various applications.
- Electrical Insulation: With superior electrical insulation, our products provide a safe and secure solution for electrical systems.
- Arc Resistance: The arc resistance of our products guarantees protection against electrical arcs, minimizing the risk of accidents.
- Anti-Static: Our products are anti-static, preventing the build-up of static electricity and reducing the chances of damage to sensitive electronic components.
- Good Corrosion Resistance: Designed to withstand corrosive environments, our products offer exceptional resistance to acids, alkali solutions, and other chemicals.
- Lightweight: Our products are lightweight, making them easy to handle and transport, without compromising on strength and durability.
- High Product Utilization: With high product utilization, our products ensure maximum efficiency and cost-effectiveness in various applications.
- Strong Designability: Our products offer strong designability, allowing for customization and adaptation to meet specific requirements.
- Widely Used: Our products find extensive use in a wide range of industries and applications, making them a versatile choice for various needs.
Product Parameters
| NO. |
Test ltem |
Unit |
Index |
Test |
| 1 |
Resin Content |
% |
Customized |
39 |
| 2 |
Volatile Matter Content |
% |
4.0-8.5 |
6 |
| 3 |
Density |
g/cm3 |
1.65-1.85 |
1.85 |
| 4 |
Moisture Content |
mg |
≤20 |
18 |
| 5 |
Martens Temperature |
ºC |
≥280 |
280 |
| 6 |
Bending Strength |
Mpa |
≥160 |
415 |
| 7 |
Tensile Strength |
Mpa |
≥80 |
160 |
| 8 |
Dielectric Strength |
MV/m |
≥14.0 |
18 |
| 9 |
Charpy Impact Strength |
KJ/m2 |
≥50 |
120 |
| 10 |
Surface Resistivity |
Ω |
≥1.0x10^12 |
2.0*10^13 |
| 11 |
Volume Resistivity |
Ω.m |
≥1.0x10^10 |
2.6*10^12 |
| 12 |
Flexural Modulus |
Gpa |
32.4 |
33 |
Application
It is suitable for pressing mechanical components with high strength, electrical components with complex shape, radio parts, mechanical parts and electrical parts with high strength and commutator (commutator), etc. Its products also have good electrical performance, especially suitable for hot and humid areas.
Packaging & Shipping
It should be stored in a dry and ventilated room where the temperature does not exceed 30ºC.
Do not close to fire, heating and direct sunlight, erect stored on a special platform, horizontal stacking and heavy pressure are strictly prohibited.
Shelf life is two months from the date of production. After the storage period, the product can still be used after passing the inspection according to the product standards. Technical standard: JB/T5822-2015
Company Profile
){kind=link}