Product Description
E-Glass Assembled Roving for SMC
SMC assembled roving is suitable for reinforcing unsaturated polyester, vinyl resin, etc. It has good cutting performance, good dispersion, less hairiness, fast penetration and low static electricity.
(1) Mainly used in the field of structural products, can be used to manufacture automobile bumpers and other parts. (2) Mainly used in the production of high surface quality SMC products, can be used to manufacture ceilings, door panels and so on. It can be used to manufacture automobile parts and other products with high surface quality. It is mainly used for the production of automobile ceilings.
SMC process (Sheet Molding Compound molding process): Initiator, filler, internal release agent, low shrinkage additives, thickeners, etc. are added to the resin, which is stirred to become resin paste. Resin paste falls to the main SMC machine on the lower film (commonly used polyethylene film or nylon film), at the same time in the lower film settled short cut into 25MM ~ 55MM glass fiber raw silk, and then look forward to the top covered with a layer of film, into a sheet sandwich roll. The rolls are stored for several days to thicken the material to achieve moldable viscosity, and the SMC is supplied in bundled rolls for standby. The rolls are unrolled, cut, weighed, put into a heated steel mold, pressurized to cure and molded, and then demolded, i.e., the finished product.
Product Feature
1. Good cutability, less static electricity generated during continuous high speed cutting;
2. high efficiency in dispersing the untwisted roving into raw silk after cutting, i.e. high bunching rate, usually more than 90% is required;
3. The short-cut raw silk has excellent mold-covering property, which can be covered in all corners of the mold;
4. fast resin penetration, easy to be rolled flat and easy to drive away air bubbles;
5. The raw filament tube has good annealing performance and uniform roving density, which is suitable for all kinds of spray guns and fiber delivery systems. No-twist roving for spraying is made of multi-stranded filament winding, each strand of filament contains 200 glass fiber monofilaments.
Product Parameters
| Item |
Linear Density |
Resin Compatibility |
Features |
End Use |
| BHSMC-01A |
2400, 4392 |
UP, VE |
for general pigmentable SMC product |
truck parts, water tanks, door sheet and electrical parts |
| BHSMC-02A |
2400, 4392 |
UP, VE |
high surface quality, low combustible content |
ceiling tiles, door sheet |
| BHSMC-03A |
2400, 4392 |
UP, VE |
excellent hydrolysis resistance |
bathtub |
| BHSMC-04A |
2400, 4392 |
UP, VE |
high surface quality, high combustible content |
bathroom equipment |
| BHSMC-05A |
2400, 4392 |
UP, VE |
good choppability, excellent dispersion, low static |
automotive bumper and headliner |
| Identification |
| Type of Glass |
E |
| Assembled Roving |
R |
| Filament Diameter, μm |
13, 14 |
| Linear Density, tex |
2400, 4392 |
Application
Automotive parts: bumper, rear cover box, car door, headliner;
Building & construction industry: SMC door, chair, sanitary ware, water tank, ceiling;
Electronic & electrical industry: a variety of parts.
In recreation industry: a variety of apparatus.
Packaging & Shipping
Company Profile
){kind=link}